ENGLISH
4/24
Fig. 1. Components
ELECTRICAL NETWORK
1. The supplied power voltage is AC 230 V.
2. The LED circuit has a voltage of DC 12 V.
3. The maximal power consumption of the lighting is 120 W.
4. Energy efficiency class – A
ASSEMBLY SEQUENCE
1. Place the screws in the holes in the base. Fold the crossing base elements
together.
2. Place the retaining sleeve on the bolts and secure it with the nuts. Place the
base at the desired location.
3. Remove the mast end cap which protects the cable. Insert the cable with the
plug into the base sleeve and run it through one of the base arms (the one that
has a cut-out at the end and underneath two grips for the cable). When the
cable is stretched and you are sure you won’t damage it, put the mast on the
base sleeve. Pay special attention to the power cable so that it is not cut by the
edges of the base or otherwise damaged.
4. Place the concrete tiles in the base. Place the mast in the sleeve and, when
available, secure with the knob.
5. In order to open the umbrella, pull the cord evenly (or push the handle
upwards).
6. After the umbrella has been fully unfolded, insert the locking bolt to prevent it
from folding back in.
IMPORTANT! Pull the rod through both openings of the mast.
7. Roll the excess cord onto the hook.
8. Insert the plug, sticking out from the base arm, into the power socket (230V AC).
Turn on the lighting.
COMPONENTS
The umbrella consists of: cross base with power cable (AC 230 V), frame with
integrated LED lighting and power supply(fixed inside the mast), canopy fixed to
the frame, anchoring pegs, mast cover.
