Miteq D-9301, Operation And Maintenance Manual, Page: 27 / 86

3-8
3.3.2.3.3 Status All Code = A
The Status All command requires no parameters. The converter
responds in both Local and Remote mode with the converter
frequency, and remote/local, mute, and component fault status.
Remote Command: A
Converter Response: AFffffffffL1Mm?abcdef
A: Status All indicator
F: Frequency indicator
fffffff(f): 7 or 8 digit ASCII numeric character indicating
frequency. MSD transmitted first, LSD last.
L: Local/Remote indicator
l: "0" or "1" ASCII numeric character
0 = Local
1 = Remote
M: Mute indicator
m: "0" or "1" ASCII numeric character
0 = Mute off
1 = Mute on
?: Component Fault Status indicator
a-f: "0" or "1" ASCII numeric character
0 = No fault
1 = Fault
a through f indicate the status of the six component fault lines.
3.3.2.3.4 Status Faults Code = ? (Optional)
The Status Faults command requires no parameters. The converter
responds in both Local and Remote mode with the component fault
status.
Remote Command: ?
Converter Response: ?abcdef
?: Component Fault Status indicator
a-f: "0" or "1" ASCII numeric character
0 = No fault
1 = Fault
a through f indicate the status of the six component fault lines.
a Synthesizer Alarm
b LOA Alarm
c LOB Alarm
d Power Supply Alarm
e LO1 Level Detect
f LO2 Level Detect