Miteq D-9301, Operation And Maintenance Manual, Page: 15 / 86

1-8
E. Noise Figure: 12 dB maximum
F. Image Rejection: 80 dB maximum
G. Spurious -
1. Dependent: -65 dBc
2. Independent: -90 dBm inband (no options)
-75 dBm inband (Option 16A)
-65 dBm inband (Option 16C)
H. Frequency Selection: 3.7-4.2 GHz in 125 kHz
increments
1. Channel Memories: 30 (non-volatile)
I. Primary Power: Selectable at the rear panel
(100, 120, 220, 230/240VAC)
J. Rear Panel Test Points -
1. RF LO Phase Voltage: Variable with frequency
2. IF LO Phase Voltage: 10 ±2V
3. RF LO Frequency/
Power Test Point: -15 dBm minimum, 4800-5300 MHz
4. IF LO Frequency/
Power Test Point: -15 dBm minimum, 1170 MHz
5. DC Voltage
Test Points: +20 ±0.5V
+5.2 ±0.1V
+5.2 ±0.1V