background image

2

Important Safety Instructions and Precautions

WARNING: DO NOT CONNECT DIRECTLY TO THE PUBLIC SWITCHED 
TELEPHONE NETWORK (PSTN). ANY CONNECTION OF THIS PHONE 
TO AN OFF PREMISE APPLICATION, AN OUT OF PLANT APPLICATION, 
ANY OTHER EXPOSED PLANT APPLICATION, OR TO ANY EQUIPMENT 
OTHER THAN THE INTENDED APPLICATION MAY RESULT IN A SAFETY 
HAZARD, AND/OR DEFECTIVE OPERATION, AND/OR EQUIPMENT 
DAMAGE. “EXPOSED PLANT” MEANS WHERE ANY PORTION OF THE 
CIRCUIT IS SUBJECT TO ACCIDENTAL CONTACT WITH ELECTRIC 
LIGHTING OR POWER CONDUCTORS OPERATING AT A VOLTAGE 
EXCEEDING 300 V BETWEEN CONDUCTORS OR IS SUBJECT TO 
LIGHTNING STRIKES.

WARNING: THE SOCKET OUTLET, IF USED, SHALL BE LOCATED NEAR 
THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE BY THE USER.

WARNING: USE MITEL APPROVED IEEE 802.3at COMPLIANT POWER 
ADAPTER PART NUMBER 51301151 OR MITEL Multi-Port GigE PoE Switch 
PART NUMBER 51301282.

WARNING: ANY CONNECTOR ON THE BOTTOM OF THE UNIT NOT 
DOCUMENTED IN FIGURE A IS INTENDED TO BE USED BY MITEL 
AUTHORIZED TECHNICIANS ONLY.

NOTE:  THE UC360 DOES NOT REQUIRE AN AC POWER ADAPTER. IF 
POWER OVER THE LAN IS AVAILABLE, IT SHALL BE COMPLIANT WITH 
IEEE 802.3at.

When using your phone equipment, basic safety precautions should always be 

followed to reduce the risk of fire, electric shock and injury to persons, including 

the following:
• Do not use this product near water, for example, near a bath tub, wash 

bowl, kitchen sink or laundry tub, in a wet basement or near a swimming 

pool.

• Avoid using a phone (other than a cordless type) during an electrical storm. 

There may be a remote risk of electric shock from lightning.

• Do not use this phone to report a gas leak in the vicinity of a leak.

Maintenance and Repair: There are no user serviceable parts inside the 

phones. For repairs, return the phone to an authorized Mitel dealer.

These notices may appear on the product or in the technical documentation.

This symbol may appear on the product.

Description

The UC360 Collaboration Point is a multi-media collaboration appliance and 

conference unit incorporating a large 7-inch color multi-touch display screen. 

An HDMI interface is provided to drive an in-room video projector or external 

display. A video camera can be connected via Ethernet. 

USB and micro-SD connectors are provided on the side of unit. 

What You Need to Install the UC360 Collaboration Point

The following items come in the box:

• UC360 Collaboration Point unit

• Standard 7' CAT5E cable 

• 10’ HDMI cable

System Software Requirements

The Mitel UC360 Collaboration Point is supported by:
• Mitel Communications Director (MCD) Release 5.0 SP2 and later software.

Supporting Documentation

For more information on the UC360 Collaboration Point, refer to the appropriate 

documentation available at Mitel Online:
1.  In your browser, go to http://www.edocs.mitel.com.
2.  Select a documentation suite from one of the following drop-down menus:

- Communications Platform
- Messaging
- Applications
- Solutions Guides
- Software Development
- End User Documents

3.  Log in if asked to do so.

4.  To view a document, click on the document title.

Disclaimer

Installing the UC360 Collaboration Point (see Figure 

)

Before installing the UC360 unit, ensure that you are familiar with the following 

powering options: 
• An IEEE 802.3at LAN-powered jack provides power to the phone via a 

LAN cable. (The phone receives ethernet signals and power through the 

same cable.) To install, see Steps 

 and 

.

• An Ethernet power adapter provides power to the phone via a LAN cable. 

The Ethernet power adapter is connected to the LAN via a separate LAN 

cable connected to a jack. (The phone receives ethernet signals and 

power through the same cable.) To install, see Steps 

 and 

.

NOTE:  Use only qualified Mitel-supplied 802.3at Ethernet adapters: Part 
Number 51301151 or Part Number 51301282.

DANGER

Danger indicates an imminently hazardous situation which, if not 

avoided, will result in death or serious injury.

WARNING

Warning indicates a potentially hazardous situation which, if not 

avoided, could result in death or serious injury.

CAUTION

Caution indicates a potentially hazardous situation which, if not 

avoided, may result in minor or moderate injury and/or damage to the 

equipment or property.

The exclamation point within an equilateral triangle indicates that important 

operating and maintenance (servicing) instructions are included in the 

literature accompanying the product.

!

DUE TO THE DYNAMIC NATURE OF THE PRODUCT DESIGN, THE 

INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT TO 

CHANGE WITHOUT NOTICE. MITEL NETWORKS CORPORATION, 

ITS AFFILIATES, AND/ OR ITS SUBSIDIARIES ASSUME NO 

RESPONSIBILITY FOR ERRORS AND/OR OMISSIONS CONTAINED 

IN THIS INFORMATION.

!

A

Summary of Contents for UC360









Reviews: