Mitel SmarT-1 EuroRoute, Installation & Programming Manual

Page: 122 / 128

Appendix 3 Default Data
8350-383-113-BA
121 Draft 1A, September 1998
A.3. 3. Line and Trunk Registers Continued
A.3. 4. Route Registers
Register Default Description Page No.
S10 0 Operation at Off-hook 54
S11 # Switch Hook Flash 54
S12 0
Time Between Release of Exchange Line and Next
Attempt to Connect
54
S13 9 Remote Programming MF4 Send Rate 55
S15 0 MF4 or Rotary Outgoing Recognition 55
S16 0 MF4 or Rotary Incoming Recognition 55
S18 4 Incoming Call Detection 56
S21 5 Interdigit Timer 100 (Operator Calls) 56
S22 5 Interdigit Timer 0+ (National Calls) 57
S23 5 Interdigit Timer 00+ (International Calls) 57
S24 5 Interdigit Timer Destination Digits 58
S25 5 Interdigit Timer for Cost Centre Codes 58
S26 3 Interdigit Timer for Buffer C 59
S27 9 Default Route Register 59
S28 1 100- Route 59
S30 0 Centrex (PABX) Enable/Disable 60
S31 9 Centrex (PABX) Access Digit 60
S33 0 Auto-Answer Timer in Tens of Seconds 61
S34 6 Auto-Answer Wait-for-Security-Code 61
S35 9 Auto-Answer Lockout Timer 62
Register Default Description Page No.
R40 1 Line Reverse Cancels Interdigit Timing 71
R41 0 Line Reverse Re-starts Call Timer in CIL 71
R42 0 Number of Route Beeps 90
R43 1 Cost Centre Codes Enabled/Disabled 91
R44 9 Action due to Call Failure 72
R47 1 Action on result of No Cost Centre Code Entered 91
R70 1 Line Reverse Cancels Interdigit Timing 71
R71 0 Line Reverse Re-starts Call Timer in CIL 71
R72 0 Number of Route Beeps 90
R73 1 Cost Centre Codes Enabled/Disabled 91
R74 9 Action due to Call Failure 72
R77 1 Action on result of Cost Centre Codes 91