Mitel Single-Line, User Manual, Page: 28 / 41

Mitel ® Single-Line Phone User Guide – Issue 13, September 2009
Page 17
Call Features
Remote Programming
You can use Remote Programming to access the Do-Not-Disturb (DND) and Call Forwarding
features from another system phone or an external phone.
Entering a Remote Programming Password
Before using Remote Programming, you should enter a new password.
To enter a Remote Programming password:
1. Lift the handset, and then dial 392.
2. Enter your current password (the default password is your extension number), followed
by #.
3. Enter the new password followed by #. You hear a confirmation tone.
4. Enter the new password again followed by #. You hear a confirmation tone.
To change the station password from another phone, see “Using Remote Programming” below.
Using Remote Programming
To use Remote Programming:
1. Do one of the following:
•
Call your Direct Inward System Access (DISA) number (provided by your system
administrator). If necessary, enter your DISA password.
•
Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your password followed by #. You can use Remote Programming to access any of
the following features:
To change the station password using Remote Programming:
a. Dial 392.
b. Enter the new password followed by #.
c. Enter the new password again followed by #.
To turn on DND:
a. Dial 370.
b. Enter the DND message number (01 to 20), and then enter the second-line message
text (if applicable).
To turn off DND:
Dial 371.