Mitel MiVoice 5000 User Manual Download Page 28

Page: 28 / 73

During a call

Releasing one of the correspondents

1 - Select the correspondent to be released.

2 - Press the context-sensitive

Leave

key to release the selected

correspondent.

Ending the conference

• Press

End

or hang up.

Setting up a conference during an enquiry call

You are engaged in an enquiry call (with one correspondent on line and another on hold).
You wish to set up a three-way conference.

1 - Press the context-sensitive

Conf.

key.

2 - Press the key of the blinking line then press

Conference

. This

is the correspondent who has been on hold.

-> The numbers of your two correspondents are displayed on

screen. You are holding a conference call.

Using the trace function

You want the number of the called or calling party (internal or external party) to be written
in the logbook, for example, to identify a malicious call.

1 - Press the context-sensitive

More

key in the lower panel of the

menus.

1 - Press the context-sensitive

Menu

key.

2 - Select

Trace

with

3 - Press

Select

to confirm.

-> A message confirms that your request has been taken into

account.

The number is stored in the logbook, which can be consulted by
the system operator.

Remarque :

When a call comes in and if the caller has on-

hooked first , the Trace function remains accessible for 10 sec-
onds.

Leave

Conf.

Selon programmation effectuée par l’exploitant système

Menu

Trace

Select

Summary of Contents for MiVoice 5000










































































Search results

Summary of Contents for MiVoice 5000

Reviews:

Related manuals for MiVoice 5000

Brands by name

Popular brands

Mitel MiVoice 5000, User Manual

Search results

Summary of Contents for MiVoice 5000

Reviews:

Related manuals for MiVoice 5000

Brands by name

Popular brands