Mitel Inter-Tel User Manual Download Page 64

Page: 64 / 150

Inter-Tel

Attendant Console User Guide

Hide Entry

System entries can be hidden so that they no longer display in the Directory.

To hide an entry from the Directory:

— Highlight the entry you wish to hide and right click on the mouse and then select

Hide Entry

Select

Hidden Entries

in the Tools drop-down menu.

Check

Show all entries

Highlight the entry you wish to hide. To select all entries, press

CTRL+A

NOTE:

To select all but a few entries, press

CTRL+A

to select all and then, while

holding down

CTRL

and using the mouse, click to unhighlight those entries that are

to be hidden.

Click

Hide Entry

To display a hidden entry in the Directory:

Select

Hidden Entries

in the Tools drop-down menu.

Check

Show hidden entries only

to view all the hidden entries.

Highlight the entry in the Hidden Directory Entries list. To select all entries, press

CTRL+A

NOTE:

To select all but a few entries, press

CTRL

to select all and then, while

holding down

CTRL

and using the mouse, click to unhighlight those entries that are

to remain hidden.

Select

Unhide

NOTE:

If the description or number of the entry changes, the Attendant Console will

automatically unhide and display the entry in the Directory. Custom entries cannot be
hidden. (To remove custom entries from the Directory, see

page 49

Summary of Contents for Inter-Tel























































































































































Search results

Summary of Contents for Inter-Tel

Reviews:

Related manuals for Inter-Tel

Brands by name

Popular brands

Mitel Inter-Tel, User Manual

Search results

Summary of Contents for Inter-Tel

Reviews:

Related manuals for Inter-Tel

Brands by name

Popular brands