Mitel Inter-Tel User Manual Download Page 30

Page: 30 / 150

Inter-Tel

Attendant Console User Guide

•

Font Setup:

Allows you to change the font type and size used for the lists.

—

Change:

The following dialog box appears. Select the desired font, style,

and size from the scrolling lists, then click

to apply.

—

Restore Default:

Returns to the default font.

•

Restore program when call rings:

Your Attendant Console screen moves to the

front when a call rings in, or pops up the Attendant Console screen if the program
is minimized. (If you are using the Windows 2000 operating system, this feature
may not work. Instead, the Attendant Console icon will flash in the task bar.)

•

Show hunt group calls for ACD hunt groups that I am logged in to:

Calls to

the ACD hunt group that you are logged in to are displayed in the Directory List.

•

Allow hold to toggle hold:

You can double-click

Hold

to toggle the Hold status.

•

Always show the “details” in the directory ToolTip:

The directory ToolTip

will always show the details when it is displayed.

Summary of Contents for Inter-Tel























































































































































Search results

Summary of Contents for Inter-Tel

Reviews:

Related manuals for Inter-Tel

Brands by name

Popular brands

Mitel Inter-Tel, User Manual

Search results

Summary of Contents for Inter-Tel

Reviews:

Related manuals for Inter-Tel

Brands by name

Popular brands