16
INT1400 Cordless Telephone User Guide
Cleaning Charging Unit Contacts
To maintain a good charge, it is important to clean all
charging contacts on the handset and charging unit about
once a month. Use a pencil eraser or other contact cleaner
to clean the battery charging contacts. Do not use any liq-
uids or solvents.
Base Units and Handsets
The handsets are programmed to work with a specific base unit. You cannot use a new
handset or base unit without having it reprogrammed by Mitel.
Range Limits
The INT1400 is designed for commercial use. The range has been approved for 150 to
300 feet (45 to 90 meters) per base unit. The actual range may be more or less
depending on the environment. Building wiring, walls, elevators, and other electronic
interference frequencies may limit the range of this telephone. Please see your tele-
communications consultant for information about testing your facility.
To maximize the range capability:
•
Locate the base unit at the highest point possible in the center of your coverage
zone. If you are planning to cover an outdoor area, such as a car lot, building
grounds, or campus, place the base unit near a window at the highest point within
the building.
•
Place the base unit away from any other electronic device. This includes, but is
not limited to, computer screens, radios, electronic signs, coffee pots, micro-
waves, and other electronic devices.
S
ETTING
E
NDPOINT
P
REFERENCES
Your endpoint is automatically set to specific defaults. You can, however, configure
many of these settings at any time.
Changing Volume Levels
You can select a low, medium, high, or maximum volume level.
To change a volume level:
During a call, press
on the side of the handset until you hear the desired
volume level.
CHARGING CONTACTS
RING/VOL
INT1400.book Page 16 Monday, August 4, 2008 2:46 PM
