20/1553-ANF 901 54 Uen F3 2016-03-14
102
O
THER
FEATURES
10.4.3
SELECT RINGING TYPE
To select the wanted ringing type to program, press
<Speech
or
Flash
for Internal call
or Call Back respectively. The corresponding LED starts flashing, and the programmed
melody is played.
In the display the corresponding message will be seen. The examples show the default
notes.
10.4.4
CREATING A MELODY
The telephone has the capability to handle a range of tones. See the figure and table
below to find out which notes and notations correspond to which key. If the key is
pressed and held down for a longer time than 0.5 second a long tone will be the result.
(Shown with a capital letter, for example, D). The sign + shows that the tone has been
risen one octave.
The tones are placed on the keyset as follows: