Mitel DBC 222, Directions For Use Manual, Page: 16 / 71

2/1553-ANF 901 54 Uen F7 2018-12-03 16
I
NCOMING CALLS
3.4.1 TO ORDER DO NOT DISTURB
Using DND-key
• Press the DND-key (the DND lamp is turned ON).
Using a procedure
• Lift the handset (dial tone).
• Dial *27# (the DND lamp is turned ON).
• Replace the handset.
Note: For an additional line, the DND lamp is not affected, but the ADN led itself will
flash.
3.4.2 TO CANCEL DO NOT DISTURB
Using DND-key
• Press the DND-key (the DND lamp is turned OFF).
Using a procedure
• Lift the handset (special dial tone).
• Dial #27# (dial tone and the DND lamp is turned OFF).
• Replace the handset.
3.5 IMMEDIATE SPEECH CONNECTION
With this feature a call is signaled with a tone burst after which the call is answered
automatically (you get a speech connection) in handsfree mode ( 2.8 Loudspeaker
function on page 9 ).
This feature can be permanently active or activated by means of a specially
programmed automatic answer key.
3.5.1 PERMANENTLY ACTIVE
To have the feature permanently active program the ring option with permanent imme -
diate connection with single tone burst on the line-key ( 10.7 To program ringing
options on page 57 ).
3.5.2 ACTIVATED BY AUTOMATIC ANSWER-KEY
First you have to program the ring option with immediate speech connection with single
tone burst controlled by function key on the line-key ( 10.7 To program ringing options
on page 57 ). Now you can control the automatic answer with the function key AUTO -
MATIC ANSWER. When the lamp lights up, the calls will be answered automatically.
To order
• Press the Automatic answer-key (the automatic answer lamp is turned ON).
To cancel
• Press the Automatic answer-key (the automatic answer lamp is turned OFF).