Mitel 5224 User Manual Download | Manualshive

Page: 62 / 64

background image

-56-

FAILOVER MODE

Make A Call

To make a call using the Line Interface Module line during an IP
connection failure:

1. Lift the handset. IP FAIL: ANALOG CALL appears on the display.
2. Dial the number to make the call.

Answer A Call

To answer a call using the Line Interface Module line during an IP
connection failure:

z

Lift the handset. IP FAIL: ANALOG CALL appears on the display, and the
call is answered.

EMERGENCY CALLS

WARNING FOR EMERGENCY NUMBER DIALING: Consult your local
authorities for Emergency Numbers and 911 or equivalent service availability
in your area. Emergency Number dialing should only be performed by
picking up the handset and selecting the Line Interface Module key. If
Privacy Mode is enabled and the Line Interface Module key local line is busy,
dialing will not occur on the Line Interface Module line. Emergency dialing
using an IP connection may not be supported due to ICP system
configuration and country location. For more information, contact your
System Administrator. You can make an Emergency Call to your Local
Emergency Service using the Line Interface Module line when the IP
connection has failed.

To make an Emergency Call using the Line Interface Module line:

1. Lift the handset.
2. Press the Line Interface Module key.
3. Dial your Local Emergency Number. ANALOG CALL appears on the

display.

«
...
60
61
62
63
64
»

Summary of Contents for 5224

































































Reviews:

No comments

Related manuals for 5224

Brand: Panasonic Pages: 4

Brand: Samsung Pages: 2

Brand: Samsung Pages: 62

Brand: Samsung Pages: 48

Brand: Samsung Pages: 33

Brand: Samsung Pages: 2

Focus S SGH-I937

Brand: Samsung Pages: 175

Brand: Samsung Pages: 2

Brand: Samsung Pages: 24

Brand: Samsung Pages: 2

Brand: Samsung Pages: 145

Brand: Samsung Pages: 167

Yealink SIP-T22P

Brand: Yealink Pages: 4

Yealink SIP-T22P

Brand: Yealink Pages: 2

Brand: Yealink Pages: 12

Brand: Yealink Pages: 8

Yealink SIP-T21P

Brand: Yealink Pages: 144

Yealink SIP-T41P

Brand: Yealink Pages: 178

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands