manualshive.com logo in svg

Mitel 5224, User Manual

Share
Download
Mitel 5224 User Manual Download Page 57

-51- 

Date and Time Setup (5224 IP Phone only) 

You can change the time and date that appears on all telephones equipped 
with displays. The time can be displayed in either a 12- or 24-hour format, 
depending on system programming. 

To set the time: 

1. Press  

 (SUPERKEY).  

2. Press the No softkey repeatedly until "Time?" appears on the display.  
3. Enter the time in the correct format.  
4. Press the AM or PM softkeys (if necessary).  
5. Press the Save softkey.  

To set the date: 

1. Press  

 (SUPERKEY).  

2. Press the No softkey repeatedly until "Date?" appears on the display.  
3. Press the Yes softkey.  
4. Enter the date in the indicated format.  
5. Press the Save softkey.  

Release 

Release lets you disconnect from an attempted Call Transfer or Conference 
Call without hanging up the handset. Release is useful when you encounter a 
busy or unavailable party. 

To release from an attempted transfer or conference call: 

z

Press the Release feature key or the Release softkey.  

Summary of Contents for 5224

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands