manualshive.com logo in svg

Mitel 5224, User Manual

Share
Download
Mitel 5224 User Manual Download Page 13

-7- 

5224 IP PHONE AND LINE INTERFACE MODULE 

The Line Interface Module is an optional device that adds an analog phone 
line (POTS) capability to your 5224 IP Phone (only). If Emergency Call 
Routing is not programmed on your SX-200 ICP, you must use the Line 
Interface Module to dial emergency calls. For more information on 
emergency number dialing, refer to Emergency Calls. 

If you have a Line Interface Module connected to your 5224 IP Phone, all 
programming of the Line Interface Module, except the Analog Key, is done 
by the Installer when your phone is installed. For more information, refer to 
"Using the Line Interface Module" elsewhere in this guide. 

Note: The 5212 IP Phone does not support the Line Interface Module. 

TIPS FOR YOUR COMFORT AND SAFETY 

Don't cradle the handset! 

Prolonged use of the handset can lead to neck, shoulder, or back discomfort, 
especially if you cradle the handset between your ear and shoulder. If you 
use your phone a lot, you may find it more comfortable to use a headset. 
See the section on headset usage elsewhere in this guide for more 
information. 

Protect your hearing 

Your phone has a control for adjusting the volume of the handset receiver or 
headset. Because continuous exposure to loud sounds can contribute to 
hearing loss, keep the volume at a moderate level. 

Summary of Contents for 5224

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands