MICRO 8
Installation and user manual
Page 8 of 24
Pole installation with MICRO BOX
Figure 1
1. Make a hole in the pole at a height of 80/90 cm from the ground in case you do not use the
cable gland supplied (figure 1), otherwise make a hole in one of the four sides of the base
of the MICRO BOX and fix the PG8 (figure 2).
2. Position the MICRO PL bracket at the back of the pole and using the four M4x70 screws and
the supplied washers fix the MICRO PL bracket to the base of the MICRO BOX
(figures 3 and 4).
3. Drill a hole in the center of the MICRO BOX cover using the template provided (figure 5).
4. Insert the cables into the base and into the MICRO BOX cover, into the main bracket and
close using the four supplied screws (figure 6).
5. Follow the procedure already indicated in the pole installation from point 3 (see page 7).
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
