9
Input selector/Power on/off
Rotating clockwise or anticlock-
wise will cycle through the list of
available inputs.
Unused inputs can be suspended
from the list and required inputs
can be re-named in the setup
menu. See page 13
Information Display
Volume setting and selected input
displayed by default.
Menu selection information is
displayed when in MENU mode.
Volume Knob/Menu select
Volume knob rotates in the
conventional way to regulate
the amplifiers volume. The
volume level is shown on the
main display.
Pushing the volume knob will
enable the menu page for cus-
tomising the user settings.
See page 15 for details.
Headphones
6.35mm output socket for
integrated headphone
amplifier.
Headphone impedance
should be a minimum of
32 Ohms.
Front Panel
Infra red receiver
Both the volume knob and the Source knob incorporate a push switch to change functions.
Pushing and holding the volume knob for 5 seconds will toggle in and out of the setup menu.
Pushing the Input knob will change the settings in each setup sub menu.
Standby light
2 way power switch
See page13
