6
VERY IMPORTANT
Before connecting your new Mitchell & Johnson units to the rest of your system, please
ensure all required input/output cables are connected
BEFORE
inserting the mains power
lead and powering for the first time.
User installation and safety advice
Please ensure that the mains voltage of your new Mitchell & Johnson devices are correct
for your region. The setting is displayed on a label next to the mains power inlet.
The mains voltage setting is not user adjustable, therefore the product must be returned to
the dealer/manufacturer if any changes are required.
Ensure the mains supply is switched off at the wall socket, or unplugged before installing
or moving the units.
Do not use near water, for example do not place a potted plant on top of the units or allow
drinks to be placed near the units. If liquid is spilt in to the cabinet, remove the mains leads
from the wall immediately.
The products should then be returned to your dealer for safety testing before re-use.
Failure to do so may result in electric shock or even fire!
Do not use the units in damp conditions, for example, outside of the house.
In the event of an electrical storm, remove the mains power leads from the wall outlet.
Keep away from direct sunlight and other heat sources and ensure adequate ventilation
around the products to maintain proper cooling.
Units
MUST NOT
be stacked directly on top of each other.
Never attempt to open the cabinets. There are no user serviceable parts inside and doing
so will invalidate the manufacturers warranty.
Care should be taken to ensure there is no possibility of short circuit behind the units when
in use, for example, metal framed hi-fi units may be a hazard.
