14
Mitchell & Johnson remote control
The remote control is designed to operate both the primary functions of the
Mitchell and Johnson pre/power and those of a Mitchell and Johnson CD
player
POWER:
The top red power button toggles the unit between standby and
power on.
MUTE:
Pressing the MUTE button once while the system is playing will cause
the volume to rapidly fade to zero.
A second push of the button will restore the volume level to its previous set-
ting.
INPUT:
The input buttons select the pre-allocated input sources as shown on
page 15.
VOLUME:
Two buttons, + for up and - for down, control the volume. Short
presses on the VOLUME buttons will change the volume in small increments.
Press and hold the or - buttons to smoothly raise or lower the vol-
ume.
The CD control buttons allow control of various functions on a Leema CD play-
er.
TRAY:
Opens and closes the CD tray
PLAY/PAUSE:
Press once to play the CD, press again to pause. To resume
playback, press the PLAY/PAUSE button again.
STOP:
Pushing the STOP button will terminate the playback and stop the CD from spining.
