MIRKA OS353CV, Operating Instructions Manual

Page: 33 / 124

30
Specifications subject to change without prior notice.
*The values stated in the table are from laboratory testing in conformity with stated codes and standards and are not sufficient for risk
evaluation. Values measured in a particular work place may be higher than the declared values. The actual exposure values and amount of
risk or harm experienced to an individual is unique to each situation and depends upon the surrounding environment, the way in which the
individual works, the particular material being worked, work station design as well as upon the exposure time and the physical condition of
the user. KWH Mirka, Ltd. cannot be held responsible for the consequences of using declared values instead of actual exposure values for
any individual risk assessment.
Further occupational health and safety information can be obtained from the following websites:
https://osha.europa.eu/en (Europe)
http://www.osha.gov (USA)
Product Configuration/Specifications: 10,000 opm Orbital Sander
Product Configuration and Specifications: 10,000 opm 81 mm x 133 mm (3 in. x 5 in.) Orbital Sander
Note: All vacuum machines use Ø 28 mm (1 in.) Vacuum hose fittings standard. Ø 19 mm (3/4 in.) is available.
Orbit Vac
Type
Pad
Size mm
(in.)
Model
Number
Product Net
Weight kg
(pounds)
Height
mm
(inch)
Length
mm (inch)
Power
watts (HP)
Air Consumption
lpm (scfm)
*Noise
Level
dBA
*Vibration
Level
m/s
2
*Uncertainty
K m/s
2
3 mm
(1/8 in.)
Central
Vacuum
81 x 133
(3 x 5)
OS353CV 0.85 (1.9) 95 (3.7) 217 (8.5) 179 (0.24) 453 (16) 76.5 3.23 0.81
Self-
Gen.
Vacuum
81 x 133
(3 x 5)
OS353DB 0.85 (1.9) 95 (3.7) 224 (8.8) 179 (0.24) 453 (16) 84.0 2.30 0.72
The noise test is carried out in accordance with EN ISO 15744:2008 - Hand-held non-electric power tools -- Noise measurement code -- Engineering method (grade
2) and EN ISO 11203:2009 Acoustics-Noise emitted by machinery and equipment-Determination of emission sound pressure levels at a work station and other speci -
fied positions from the sound power level.
The vibration test is carried out in accordance with EN ISO 28927-3, Hand-held portable power tools – Test method for evaluation of vibration emission – Part 3:
Polishers and rotary , orbital and random orbital sanders.