GUIDE TO INSTALLATION AND OPERATION
24
| HMP-1801
Default values are:
•
SD: 25 Mbps
•
HD: 100 Mbps
Note that the maximum bitrate for the Key output is 50 Mbps.
3.4.3.11 The Record / Audio tab
The HMP-1801 allows the capture of up to 8 audio channels, of
the 16 available at the input. This panel allows the user to
enable and assign the input audio channels to the audio file that
will be recorded.
•
Requires the Audio option
Audio Capture: Click the checkbox to enable the capture of
audio during the record process.
Audio Input channels: The embedded audio channels of the
input HD/SD SDI signal
Destination Audio Channels: The audio channels of the audio
file that will be ingested.
•
Click the checkboxes in the matrix to assign input
channels to destination channels.
3.4.3.12 The Record / ANC tab
AFD – Extraction –
If enabled, the AFD code will be captured
during the record process.
Time Code – Extraction
– If enabled, the time code will be
captured during the record process.
Closed Caption – Extraction
– If enabled, the closed
caption will be captured during the record process.
Dolby metadata (SMPTE 2020) – Extraction
– If enabled, the
Dolby metadata will be captured during the record process.
Dolby metadata (SMPTE 2020) – Packet SDID
– Select the ID
of a single Dolby stream to extract
Name Dropper – Extraction –
Use the pulldown to set
Namedropper extraction ON or OFF
Name Dropper refers to program-specific control signals for
downstream graphics inserters in the data stream.
Figure 3.13 Setting / Record / Audio tab
Figure 3.14 Setting / Record / ANC tab