GUIDE TO INSTALLATION AND OPERATION
114
| LGK-3901/DSK-3901
Front Panel Menu Name
LGK
DSK
Description
GPI OUT 6 ON
[4.10.2] Selects an event that will trigger GPI_OUT_6 to switch on
GPI OUT 6 OFF
[4.10.2] Selects an event that will trigger GPI_OUT_6 to switch off
GPI OUT 7 ON
[4.10.2] Selects an event that will trigger GPI_OUT_7 to switch on
GPI OUT 7 OFF
[4.10.2] Selects an event that will trigger GPI_OUT_7 to switch off
SHOW GPI IPS
Shows current state of GPI inputs
SHOW GPI OPS
Shows current state of GPI outputs
TIMECODE
TIMECDE SOURCE
LTC
Selects LTC as the timeout source
VITC
Selects VITC as the timeout source
TIMECDE STATUS
“LTC” or “VITC” if valid TC is present; otherwise “BAD-Internl”
“DF” for dropframe; “ND” for no dropframe
“Fwd” or “Bwd” shows LTC direction
TIMECDE TIME
“Ext” if valid external time code; “Int” if using internal clock
DATE/TIME
DATE
Sets the card’s date (internal clock only). Preserved until next restart
TIME
Sets the card’s time (internal clock only). Preserved until next restart
TIME ZONE
Sets the card’s timezone
SERIAL COMMS
SERIAL PORTS
COM 1
BAUD RATE
[5.4.8] Sets baud rate for COM 1 (9600, 19200, 38400, 57600, 115200)
PROTOCOL
[5.4.8] Sets protocol for COM 1 (Automation, Intuition)
SERIAL TYPE
[5.4.8] Sets serial type for COM 1 (RS232, RS422)
COM 2
BAUD RATE
[5.4.9] Sets baud rate for COM 2 (9600, 19200, 38400, 57600, 115200)
PROTOCOL
[5.4.9] Sets protocol for COM 2 (Automation, Intuition)
SERIAL TYPE
[5.4.9] Sets serial type for COM 2 (RS232, RS422)
SERIAL LEVEL
STRICT
Enforces strict serial communications from automation. The STX must
always alternate between STX0 and STX1. If no ACK is received the
message must be sent again with the same type of STX.
RELAXED
Allows relaxed serial communications from automation. The STX does
not need to alternate between STX0 and STX1 as either value is always
valid.
VIDEO STANDARD
625 LINE
[4.3.1] Selects 625i / 50 as the next video standard
525 LINE
[4.3.1] Selects 525i / 59.94 as the next video standard
1080I/59.94
[4.3.1] Selects 1080i / 59.94 as the next video standard
1080I/50
[4.3.1] Selects 1080i / 50 as the next video standard
1080P/59.94 A
[4.3.1] Selects 1080p Level A / 59.94 as the next video standard
1080P/50 A
[4.3.1] Selects 1080p Level A / 50 as the next video standard
720P/59.94
[4.3.1] Selects 720p / 59.94 as the next video standard
720P/50
[4.3.1] Selects 720p / 50 as the next video standard
REFERENCE
OFFSET
LINES/SAMPLES
[4.4.2] Sets the Output Reference Offset in Lines and Samples
LINES/US
[4.4.2] Sets the Output Reference Offset in Lines and micro seconds
URS
DISABLED
[4.4.1] Disables URS from REF-1801 card
ENABLED
[4.4.1] Enables URS from REF-1801 card (if present)
STORES
STORES CONFIG
Selects the stores to keyer configuration.
STORES MEMORY
Sets the memory allocation for each available store
INTUITION
USO
RESTRITO
