7
2.5 Impedance Selection Jumpers
Depending on the type of rear module used with the ADX-102i/104i/108i, the
proper output impedance selection must be set on the module. When used with an
AES3 rear panel (Symphonie-R-AX, Symphonie-R-A110 or Quartet-R-A-110) set
the impedance jumper to 110
Ω
. When used with an AES-3id rear panel
(Symphonie R-A75, Symphonie-R-CX or Quartet-A-75) set the impedance jumper
to 75
Ω
.
1. Referring to Figure 2.7 , locate jumpers LK1, LK2, LK3, LK5, LK6, LK7, LK8
and LK9 at the rear of the ADX-102i/104i/108i module. Jumpers correspond to
AES outputs located above as shown on picture 2.7.
Note: jumpers are not arranged in numerical order.
Figure 2.7
Impedance jumpers location
Summary of Contents for ADX-102i
Page 2: ...i ...
Page 6: ...v ...
Page 16: ...10 Figure 3 2 ADX 108i menu hierarchy ...