Mirage BOX2IP, User Manual

Page: 6 / 44

Safety Instructions
6
Thus, energy consumption during Save Energy
Standby Mode is reduced to less than
0.5 Watt!
2.5 Guarantee
The warranty of the mirage HDTV satellite
receiver corresponds to the legal regulations at
the time of purchase.
3 Safety Instructions
3.1 Intended Use
The HDTV satellite receiver is intended for
private receiving of digital satellite television
(DVB-S/S2). It is exclusively intended for such
purpose and must be used exclusively for such
purpose.
Any other use is deemed to be unintended use.
3.2 Risks in Case of Intended Use
CAUTION!
Humidity, wrong mains volt-
age and/or wrong mains
frequency, lightning stroke
or mechanical overload may
cause malfunction of or
damage to the device.

Ensure that the receiver
(in particular the mains
plug) and the remote con-
trol are not exposed to
any humidity. Example:
Do not place filled flower
vases or similar onto the
receiver.

Only connect the receiver
to 175…250 V ~, 50/60
Hz.

Disconnect mains plug in
case of thunderstorms or
malfunction.

Do not place heavy items
onto the receiver.

Do not bend or squeeze
the cable.
WARNING!
Risk of electric shock when
contacting mains voltage.
Damage to housing,
mains cable or improper
repair may result in con-
tact to mains voltage.

Do not place heavy items
onto the receiver.

Do not bend or squeeze
the cable.

Repairs of plug, cable or
receiver should only be
performed by qualified
specialists.
3.3 Grounding
The satellite antenna must be grounded
properly. Note the relevant VDE
0F
1
regulations
1F
2
.

We recommend that the outdoor
unit of the satellite system should
be installed by a professional!
3.4 Location

Place the receiver onto a solid and level
surface.

Protect the receiver from humidity, heat,
dust and dirt.

Do not place items filled with liquid, e.g.
flower vases, onto the receiver.

Protect the receiver from dripping and
splash water.

Do not place burning items, e.g. burning
candles, onto the receiver.

Ensure sufficient ventilation (ventilation
slots must not be blocked): the receiver
should have a distance of at least five cen-
1 VDE = Verband der Elektrotechnik, Elektronik,
Informationstechnik (German) = Association for
Electrical, Electronic & Information Technologies
2
DIN EN 60728-11 VDE 0855-1:2011-06: Cable
networks for television signals, sound signals and
interactive services, Part 11: Safety