Mira Mode Maxim, Installation And User Manual

Page: 14 / 26

27 26
Installation: Shower Fittings
Installation: Ceiling Fed Shower Fittings
Mark the positions of the fixing holes
for the slide bar.
1
Mark the position of the hole on the
ceiling. Cut the hole in the ceiling to a
diameter of 29mm.
2
Use of Flow Regulators
It is recommended that appropriate flow regulators should be fitted to the handset and
deluge head.
Note: The flow regulator in the deluge head should always be greater than the handset.
The customer can use a combination of the provided flow regulators to meet their
system and user requirements. The flow regulators provided are as follows:
Fix at convenient height for all the family. Position the fittings so that water sprays down the
centre of the bath, or away from the opening of a shower cubicle. Water should spray away
from the Controller when the handshower is held on the slide bar.
Drill the fixing holes in the wall. Fit the wall plugs and the slide bar supports and install
the slide bar assembly to the wall.
Important! If supplied slide bar spacers are required, centre distance for ceiling
hole will increase to 75mm from wall. Use longer fixing screws if you are using
the spacers.
3
Optional
Spacers
(supplied)
DO NOT Drill
into buried pipes
DO NOT Drill
into buried cables
7.0 mm
Direction of flow
Colour
White
Lilac
Pink
Flow Rate
12 litres/min
9 litres/min
6 litres/min
645mm Max.
600mm
50 mm