14
rear Entry supplies
rising or Falling supplies
securing Brackets
(Mounting on Front
Face of Wall)
Mounting using
rear Fixing Points
securing Brackets
(Mounting on rear
Face of Wall)
Installation Methods
exposed element Thermostatic Mixer
the
exposed
Element Mixer can be
installed with rear, rising or falling supply
inlets.
For rear entry supplies, go to section:
‘exposed Thermostatic Mixer, 1. Rear
entry supplies’
.
For rising or falling supplies, go to section:
‘exposed Thermostatic Mixer, 2. Rising
or Falling supplies’
.
Built-in element Thermostatic Mixer
the
Built-in
Element Mixer can be
installed with rising or falling supply inlets
(rising inlets are illustrated).
the Mixer can be installed using rear
Fixing Points on the Body, or by using the
securing Brackets (supplied) on the Front
Face of a solid Wall or stud Partition, or on
the rear Face of a laminated Panel.
For installation into a solid Wall or stud
Partition using the securing Brackets, go
to section:
‘Built-in Thermostatic Mixer,
1. solid Wall or stud Partition (using
securing Brackets - Mounting on Front
Face of Wall)’
.
For installation into a solid Wall or stud
Partition using the rear Fixing Points, go
to section:
‘Built-in Thermostatic Mixer,
2. solid Wall or stud Partition (using
Rear Fixing Points on Thermostatic
Mixer)’
.
For installation behind a laminated
Panel using the securing Brackets, go to
section:
‘Built-in Thermostatic Mixer,
3. Laminated Panel (using securing
Brackets - Mounting on Rear Face of
Wall)’
.
Summary of Contents for Element Thermostatic Mixer
Page 42: ...42 notes...
Page 43: ...43 notes...
