7
4
Locate the remote assembly on to the wall plate and twist until the symbol is aligned
to the vertical line on the wall.
Clean off the vertical line once the on/off remote is correctly installed.
If required, the ON/OFF remote button can be removed from the backplate by
rotating anticlockwise.
Remote
Wall Plate
Maintenance
Changing the Battery
When the battery power is getting low, a red
light will precede normal operational light
sequences.
Once the battery is completely discharged,
the red light will flash three times and the
remote will no longer work indicating the
battery must be replaced.
To replace the battery, remove the remote
from the wall plate by rotating anticlockwise
from the wall plate.
Un-screw the battery cover and replace the
battery with a new CR2032 3V lithium battery.
Ensure the battery cover is replaced and
fully tightened.
CR 2032
3V
+
Battery
Cover
Remote
