5
Pair the Remote:
1
3
2
CR 2032
3V
+
Rotate the cover anti-clockwise to
remove from the remote assembly.
Insert the battery and refit the cover
into remote assembly.
Note: The positive symbol on the
battery MUST be facing outside.
Turn OFF the electrical supply to digital
mixing valve. Wait for 10 seconds, and
turn ON again.
Power Indication
LED
4
Within 30 seconds of powering ON the
valve, press and hold the remote button
for 6 seconds – a light on the rear of the
remote will flash yellow then change
to a green pulse to confirm pairing is
successful.
Once paired, the remote button will now
be able to turn on the product.
If no digital mixing valve is found, the
light will continue to flash yellow. Move
the remote button closer to the digital
mixing valve and repeat step 3-4 until
pairing is successful.
Remote
Cover
Cover
Battery
