Mira Activate 2.1903.098 Installation And User Manual Download Page 2

2

1.  Installation of this product must be carried out in accordance 

with these instructions by qualified, competent personnel. Read 

all instructions before commencing installation.

2.  Failure to install the product in accordance with these instructions 

may adversely affect the warranty terms and conditions

3. 

DO NOT

 install the remote in areas with high humidity and 

temperature (e.g. steam rooms and saunas).

4. 

DO NOT

 perform any unspecified modifications, drill or cut holes 

in the product other than instructed by this guide. When servicing 

only use genuine Kohler Mira replacement parts.

5.  Make sure that you fully understand how to operate this remote 

and make sure that it is properly maintained in accordance with 

the instructions given in this manual.

6.  This product can be used by children aged from 8 years and 

above  and  persons  with  reduced  physical,  sensory  or  mental 

capabilities or lack of experience and knowledge if they have 

been given supervision or instruction concerning the use of the 

appliance in a safe way and understand the hazards involved.

7. 

DO NOT

 allow children to play with the product.

8. 

DO NOT

 allow children to clean or perform any user maintenance 

without supervision.

9. 

DO NOT

 remotely operate or alter any of this product’s shower 

and bathing settings if it is already occupied and / or being used 

by another person.

Important Safety Information

Products manufactured by Kohler Mira Ltd. are designed to be safe, provided that they are 

installed, used and maintained in good working order, in accordance with our instructions 

and recommendations. Follow all warnings, cautions and instructions contained in this guide, 

and on, or inside the product. Failure to follow the instructions provided with this product 

will invalidate the guarantee.

WARNING!

 To reduce the risk of fire, electric shock or injury please read the important 

information listed below.

Summary of Contents for Activate 2.1903.098









Reviews: