USER MANUAL
SMALL-SIZE INFRARED GAS SENSOR MIPEX-02-3-RX-1.1 G
ESAT.100200.02.02 UM
September 23, 2021
Page 4 of 41
THE SOLE PROPERTY OF SIA MIPEX. ANY REPRODUCTION WITHOUT THE WRITTEN PERMISSION OF SIA MIPEX IS PROHIBITED.
1. INTRODUCTION
This user manual (UM) is intended to describe design and operation of small-sized gas sensor
MIPEX-02-3-RX-1.1 G (hereinafter MIPEX-02 or sensor). UM contains basic technical data,
recommendations and other information necessary for proper operation, maintenance and storage
of sensor.
SIA MIPEX reserves the right to make changes to this manual.
1.1. List of abbreviations
•
ADC – Analog-to-Digital Converter.
•
LED – Light Emitting Diode.
•
CGM – Control Gas Mixture.
•
NDIR – Non-Dispersive Infra-Red.
•
UART – Universal Asynchronous Receiver/Transmitter.
•
CRC – Cyclic Redundancy Check.
•
IP – Ingress Protection.
•
ASCII – American Standard Code for Information Interchange.
•
Hex – hexadecimal.
1.2. List of terms
•
Target gas is a gas, which sensor is intended to detect and measure its concentration.
•
Calibration gas refers to CGM containing that gas, used for sensor calibration.
Any command stated in this UM as <X>, where X stands for a command text consisted of any
number of characters, must be read and/or sent without the symbols “<” and “>”.