USER MANUAL
SMALL-SIZE INFRARED GAS SENSOR MIPEX-02-3-RX-1.1 G
ESAT.100200.02.02 UM
September 23, 2021
Page 25 of 41
THE SOLE PROPERTY OF SIA MIPEX. ANY REPRODUCTION WITHOUT THE WRITTEN PERMISSION OF SIA MIPEX IS PROHIBITED.
Appendix C.2. Communication protocol commands
There are several types of commands used for communication with sensor:
1. commands for requesting measured data and diagnosing (see Appendix C.2.1);
2. commands for controlling operating mode (see Appendix C.2.2);
3. commands for requesting factory settings and properties (see Appendix C.2.3);
4. commands for sensor configuring and span calibration (see Appendix C.2.4);
5. commands for configuring net address (see Appendix C.2.5).
•
Always check command syntax before sending. Commands that are not listed
in this user manual are prohibited. Otherwise, it may result in malfunction of
sensor.
•
In earlier versions of the firmware, some commands are unavailable.