MIOPS MOBILE Remote User Manual
l.
HDR Mode
The HDR mode will take pictures with different exposures automatically, so you can
later combine them to make an HDR picture. This mode is based on three
parameters. These are Center, EV(+-) and Frame.
HDR mode takes pictures in odd numbers (3, 5 and 7). The picture in the middle of
the sequence (respectively 2
nd
, 3
rd
and 4
th
) will have the center exposure value. The
other pictures will have changing exposure starting from the lower end up to the
higher end. The other exposure values are calculated with the number of stops
between each frame per the total frame number.
Once you start the HDR mode, you can see
the progress on the screen with circles at
the bottom of the screen. There will be an
equal number of circles to the Frame value.
In the screenshot on the left, the Frame
value is set to 3, so there are three circles at
the bottom.
Each circle shows the exposure for value for
that picture. Once the picture taking starts,
the circles will display the exposure
duration by filling up with an orange circle.
This will continue from circle to circle until
all of the HDR pictures have been
successfully
taken.
The HDR functionality is provided with the BULB mode of the camera. The camera
must be in BULB mode; otherwise all of the pictures will have the same exposure.
The shutter speed you can achieve over the shutter release port is limited. In most
cameras you cannot get faster than 1/30
th
of a second. Because of this limitation,
some EV(+-) and Frame values will be disabled for some Center values.
HDR Mode
