Minuteman SW5X PB40PH, Instruction Manual

Page: 37 / 144

6 Maintenance/Service
6.1 Maintenance Instructions
Compliance with our recommenda-
tions concerning maintenance work
will give you the certitude of having
an effective and dependable machine
at your disposal.
It is better to take precautions than
repairing damages - and it saves
money!
The SW5X has to be inspec-
ted for safe condition by an
authorized expert as requi-
red, but not less than once
a year.
Results of such an inspec-
tion have to be kept on file
at least until the next in-
spection is performed.
Please contact your local distributor if
you cannot do the maintenance
works as prescribed in the mainte-
nance schedule in-house. He will
have these works done for you and
has qualified personnel and genuine
spare parts at disposal.
When cleaning or servicing
the machine, or replacing
parts, have the motors stop-
ped and the key removed,
the negative battery pole
disconnected and the ser-
vice brake (parking brake)
engaged.
In case of questions or orders for
spare parts, please always quote your
machine's serial indicated on the
nameplate
Refer to chapter 1.3.1 Fig. 2/13 for
position of nameplate.
Collect spilled oil and
provide for adequate
disposal.
Use appropriate tools for
servicing, maintenance and adjusting
work only.
Spare parts at least will have to be of
the same quality as genuine parts
are.
Do not remove or install ti-
res or repair a rim. Take the
wheel and rim to a works-
hop where qualified person-
nel and the required speci-
fic tools are available.
When working at the elec-
tric system disconnect the
negative pole of the battery.
Maintenance/Service
37