Minuteman SW5X PB40PH, Instruction Manual

Page: 12 / 144

1.6 Maintenance Instructions
A good approach to prevention of
accidents is proper maintenance of
the machine.
Before proceeding to repair or main-
tenance work remove the key.
Use appropriate tools for maintenan-
ce, service, setting etc.
As far as aspects of safety are con-
cerned, spare parts will have to be at
least of the same quality as the genu-
ine spare parts.
Switch off the motors befo-
re maintaining the machine
or replacing parts of it. Turn
off the machine and pull the
key.
Check hydraulic hoses and
lines for leakage or dama-
ges in regular intervals. Re-
place defective hoses and
lines immediately.
Before changing wheels
protect the machine against
rolling by placing wedges.
Proceed to wheel changing
when the machine is on le-
vel and solid ground.
Do not repair the pneumatic
tires mounted to the machi-
ne yourself. Dismount the
wheel and take it to repair to
a tire workshop.
Use of other than the cylin-
der brooms and side brus-
hes approved by the manu-
facturer is not acceptable
(see technical data) since
use of other cylinder
brooms and side brushes
may affect your safety.
When handling lubrica-
ting agents, the appli-
cable regulations for
protection of the envi-
ronment and preven-
tion of fire have to be
complied with. Provide
for disposal of used oil
and grease in accor-
dance with the provi-
sions imposed by law.
Collect cleaning
agents, oil, fuel oil, gre-
ase etc. and provide for
adequate disposal. Wi-
pe away spilled sub-
stances.
Safety Information
12