Minuteman Mirage 27", Parts And Instruction Manual

Page: 22 / 32

Parts and Instruction Manual -
Mirage 27” Propane Burnisher
Page 15
TROUBLESHOOTING GUIDE
Note: When trouble occurs be sure to check for simple causes, which at first may seem too obvious to be considered.
For example, a
starting problem could be caused by propane starvation due to an empty propane cylinder or an
unopened service valve.
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
Starter Motor Does Not Operate Weak or Dead Battery Recharge or Replace Battery
Ignition Switch Faulty Check or Replace Switch
Dead Man Switch Not Engaged* Engage Dead Man Switch Prior to Engaging
Starter
Dead Man Switch Faulty* Check or Replace Dead Man Switch
For Additional Causes See Engine Manual or Dealer
Engine Turns Over But Does Not Start or Run Fuel Tank Not Connected Disconnect and Reconnect Tank
Fuel Tank Empty Refill or Replace Tank
No Fire at Spark Plug Replace Spark Plug
Engine Oil Pressure Low Check and Fill Oil To Correct Level
Oil Pressure Switch Faulty* Check or Replace Oil Pressure Switch
For Additional Causes See Engine Manual or Dealer
Engine Runs with Loss of Power or Excessive
Exhaust Fumes Restriction in Air Cleaner Service Air Cleaner
Ignition System Misfire Check or Replace Ignition Coils
Poor Compression or Timing See Engine Manual or Dealer
Engine Running Hot or Over Heating Intake Screen or Bonnet Filter Clogged Clean Screen and or Bonnet Filter
Cooling Fins Clogged See Engine Manual for Cleaning
High Oil Consumption Numerous Causes See Engine Manual or Dealer
Engine Knocks and Other Engine Noises Numerous Causes See Engine Manual or Dealer
Electric Clutch Will Not Engage* Loose or Faulty Wiring Check Wiring
Clutch Switch Faulty Check or Replace Clutch Switch
Clutch Out of Adjustment See Your Dealer
(*If Unit Is Equipped With This Option)