11
Machine Overview
Solution Flow Control Switch
(A)
When the switch is pushed all the way forward the water is shut off . When the switch is pushed all the way down, the water is all the way on. The water
pressure is variable between these two stages. A solenoid prevents the solution from fl owing when the machine is not in motion, or the brush is not turned on.
Forward/Reverse
(B)
Pushing the switch forward puts the machine into forward motion. Pushing the switch back put the machine into reverse.
Horn Pushbutton Switch
(C)
Pushing the button sounds the horn.
Battery Status Indicator
(D)
Indicates how much battery life remains. When the machine is at 10% runtime only 2 leds will be illuminated. At 5% runtime the LEDS will fl ash. All scrub
functions will work for an additional fi ve minutes and then they will shut off until the batteries are recharged.
Sport Mode Indicator (optional)
(E)
When this light is illuminated, it indicates that the machine is in sport mode.
Brush Pushbutton
(F)
This button illuminates blue when turned on, lowers, and activates the brush when the machine moves.
Vacuum Pushbutton
(G)
This button illuminates orange when turned on, and activates the vacuum. This will also lower the squeegee when moving forward., The squeegee will
automatically raise when the reverse position is selected. The squeegee will stay down for 8 seconds after this button is turned off , and the vacuum motor
will run for 15 seconds.
Emergency Shutoff - Main Circuit Breaker
(H)
Kills power to entire machine. This switch must be on when charging the batteries.
To be used only in case of emergency situations.
Keyswitch
(I)
Turns on the machine. Also used to unload the brush.
Control Panel Descriptions