background image

18

19

Battery Type

Typical Recharge Time

Battery Part Number

Model Number

SYSTEM SPECIFICATIONS

Format

Rack/Tower Convertible

DC Current

39.2 Amps

BATTERY SYSTEM

Typical Battery Life

Battery Quantity

System Voltage

Sealed, Non-Spillable, Maintenance Free, Value Regulated, Lead Acid

3-5 years, depending on discharge cycles and ambient temp

Battery Cable Length

21" / 533.4mm

PHYSICAL

Weight - Net

Size - Net
L X W X H

Size - Shipping
L X W X H

Weight - Shipping

23.4 x 17.3 x 5.14"
595 x 440 x 130.6 mm

29.5 x 23.6 x 10.9"
750 x 600 x 276 mm

REGULATORY COMPLIANCE

Safety and Approvals

EMC Verification

cTUVus (Conforms to UL1778 4th Edition & CSA 22.2 no. 107.3-05)

FCC Class B, CE certified

B00056

B00058

122.4 lbs
55.5 Kgs

80.5 lbs
36.5 Kgs

134.5 lbs
61.0 Kgs

172.0 lbs
78.0 Kgs

16

20

192VDC

240VDC

BP192RTXL

BP240RTXL

8-hours to 90% after full load discharge

IF THE BATTERY PACK REQUIRES SERVICE

Chapter 6: Obtaining Service

Chapter 7: Specifications

1. Verify there are no tripped circuit breakers and that the batteries are good.

A tripped circuit breaker and defective batteries are the most common iss-
ues.

2. Call your dealer for assistance.  If you cannot reach your dealer, or if they

cannot resolve the issue call or fax the Technical Support department at the
following numbers; Voice phone (972) 446-7363, FAX line (972) 446-9011
or visit our Web site at www.minutemanups.com the "Discussion Board".
Before calling the Technical Support Department have the following infor-
mation available:
a)

Contact name and address.

b)

Where and when the unit was purchased.

c)

All of the model information about your unit.

d)

The serial number of your unit.

e)

Any information on the failure, including LEDs that may be illuminated
or error codes displayed.

f)

A description of the protected equipment including model numbers, if
possible.

g)

A technician will ask you for the above information and if possible,
help solve the issue over the phone.  In the event that the unit requires
factory service, the technician will issue you a Return Material Autho-
rization Number (RMA #).

h)

If the unit is under warranty, the repairs will be done at no charge.  If
the unit is not under warranty there will be a charge for the repair.

3. Pack the unit in its original packaging.  If the original packaging is no lon-

ger available, ask the Technical Support Technician about obtaining a new
set.  It is important to pack the unit properly in order to avoid damage in
transit.  Never use Styrofoam beads for a packing material.
a)

Include a letter with your name, address, day time phone number,
RMA number, a copy of your original sales receipt, and a brief desc-
ription of the problem.

4. Mark the RMA # on the outside of all packages.  The factory cannot accept

any package without the RMA # marked on the outside.

5. Return the unit by insured, prepaid carrier to:

Para Systems Inc.

MINUTEMAN UPS

1809 W. Frankford Road, Suite 150

Carrollton, TX 75007

ATTN: RMA # _______

31.5 x 23.6 x 9.1"
800 x 600 x 230 mm

25.2 x 17.3 x 3.5"
640 x 440 x 89 mm

35.7 Amps

Battery Cable Type

Premolded #8 AWG

Output Protection

Resettable Circuit Breaker

ENVIRONMENTAL

Operating Temperature (max)

Operating/Storage Humidity

Operating Elevation

0 to 40

°

C (+32 to +104

°

F)

95% Non-Condensing

0 to 2,000m (0 to +6,562 ft)

Storage Elevation

0 to 15,000m (0 to +49,213 ft)

Storage Temperature

-15 to +50°C (+5 to +122°F)

NOTE:  

These Battery Packs do not have internal chargers.  The typical recharge time is based on

the UPS charging the batteries.

NOTE:

  Specifications are subject to change without notice.

Summary of Contents for BP192RTXL













Reviews: