3
Chapter 2
Setting up your Panel Touch Computer
Unpacking Your Panel Touch Computer
You should have the following components:
Panel Touch computer & Panel Touch base unit
Screws to attach the base unit to the computer
Power adapter & power Cord
Drivers & manual files are included on the hard drive
Site selection
Consider the following when selecting sites:
The area should be well ventilated.
Avoid glare from bright overhead lighting.
The system should be placed on a hard surface.
There should be easy access for power and other cabling requirements.
Installation Procedures
For the physical installation, simply:
•
Route cables through the cast alloy stand. Position the cables to the side of the stand.
•
Insert stand front tabs into slots on back of MP5000.
•
Remove the screw on the center top of the MP50000 and use it to secure the stand to the computer.
