Minsk Tractor Works Belarus 1221.2, Disassembly-Assembly Manual

Page: 250 / 302

Disassembly-assembly manual for tractor BELARUS-1221.2/1221 В .2/1221.3/1221.4
249
e) disconnect collars of drain hose (12) on the oil tank and on hydraulic hoist (2) and remove
it having first released the fastening.
f) disconnect sleeves (6) of rear left-side outlets of distributor and remove them, having first
released the fastening.
g) disconnect sleeves (6) of rear left-side outlets of distributor and remove them, having first
released the fastening.
h) to avoid ingress of foreign particles inside internal cavity of oil lines, wrap up ends of all
dismounted oil lines with polyethylene and place them on clean surface.
j) make installation and fastening of dismounted oil lines in reverse sequence
i) unscrew four bolts that fasten oil tank (1) to body of clutch coupling.
k) slightly shake oil tank and, having hooked arm (9) by frame crane, dismount oil tank off
transmission.
l) place oil tank on clean surface to avoid ingress of foreign particles on connecting sites of
oil lines.
Figure 9.8
Dismounting-mounting of distributor RS 213 Mita:
а ) disconnect control tie-rods 1, 2 from distributor 3 (Figure 9.9);
b) disconnect from distributor (3) pressure oil line (4), oil lines of outlets 5, 6, 7, 8, 9, 10, drain oil
line 11;