Minsk Tractor Works Belarus 1221.2, Disassembly-Assembly Manual

Page: 213 / 302

Disassembly-assembly manual for tractor BELARUS-1221.2/1221 В .2/1221.3/1221.4
212
Figure 7.17
9) install bushing (19) in shock absorber (18) on the bottom side of pipe (13) to the end;
10) lubricate inside surface of bushing (19) with grease LITOL-24;
11) put on the end face of washer (32) grease LITOL-24 and press with hand to end face of
bushing (19);
12) supporting from below pipes (13) bushing (19) with shock absorber (18) and washer (32),
put from top side shaft (15) inside pipe (13);
13) put segment key (14), (figure 7.17), measuring 5 х 10 mm inside key groove of shaft (15)
and mount shank of shaft inside yoke (10) of cardan connection so that key went into key
groove of yoke (10);
14) align cut of shaft (13) with opening in yoke (10);
15) put bolt (11) with bending washer (9) and nut (8) with second washer (9);
16) tighten nut (8) and lock bolt and nut with bending washers;
Figure 7.18