35
36
a) The height of installation is most effective if the camera is mounted at
the same height as the target area to be recorded.
b) Operate the camera in TEST mode for at least one minute to warm the
camera up.
c) Walk in front of the PIR. If the red LED indicator light flashes, the PIR is
functioning properly and the position where you walked is within range
of the camera’s sensor. Repeated testing can help in determining the
maximum sensor range of the area you wish to observe.
Notes:
– When you test the PIR, please walk horizontally in front of the
PIR – vertical movements will not be detected by the PIR.
– Please walk quickly if you are far away from the PIR.
– The default time is 5 minutes to automatically deactivate the
camera when not recording.
5. Playback video and photo files:
Press the REPLAY button to enter
the playback mode; press the UP and DOWN buttons to select files;
press MENU to choose whether or not to delete the files. If the file is a
video clip; press SHOT or OK to play. During playback, press SHOT or
OK to pause, or press UP or DOWN to quit playback; when the selected
file is a photo, press the LEFT or RIGHT button to zoom in or out, then
press and hold the UP, DOWN, LEFT or RIGHT button to move the
zoomed image up, down, left or right.
6. MENU Setting:
Press MENU to enter the system settings mode to make
the following adjustments:
a) Press UP and DOWN to select the submenus.
b) Press OK to enter the submenu or confirm the setting.
c) Press MENU to exit the settings mode.
See the chart for more details:
Setup
Item
Options
Description
Mode
Camera (Default),
Video, Video
Betriebsmodus Setup
Photo Size
12 MP, 8 MP, 5MP (default) Set image resolution.
Video Size
1080p, 720p, WVGA, VGA
Set video resolution.
Picture No.
01P (default), 02P, 03P
Set the number of pictures;
03 photo option is only
possible when set at 5 MP
resolution.
Video Length
1 bis 60 s, 3 min, 5 min,
10 min (Standard: 10 s)
Set the video length when
in automatic IR shooting
mode.
Interval
0 bis 59 s, 1 bis 60 min
(Standard: 1 min)
Set the time interval for
photographing/videotaping
in automatic IR shooting
mode.
Time Stamp
Off, On (Standard)
Turn date and time stamp
on or off.
Time Switch
Off (Standard), On
When On is chosen, you
can set the time frame
during which the camera
should be activated; outside
the timeframe, the camera
will be in sleep mode.
Set Serial No.
Off (default), On
When On is chosen, you
can set the serial no. for
the camera if more than
one has been set up at
various locations; the
serial number will be
displayed in photos and
videos to simplify the
identification of which
photos and videos were
made with which camera.