- 3 -
①
Remove the existing Mag unit.
②
Replace the mounting bolts to the supplied
longer one, and install LST9200 unit.
19.5mm
23.5mm
②
Continue using the same bolts to mount
LST9200 unit.
Rubber
Pad
Case-1 :
There is a rubber pad between the Mag unit and the base plate
How To Replace Your Mag Unit
!
LST9200 unit could be too heavy
against some light weight trainer
frames that the legs will be lifted off
from the floor.
But it's not a problem. The legs will
touch the floor correctly when in use.
(Fig. B)
(Fig. C)
(Fig. D)
(Fig. E)
(Fig. F)
Case-2 :
Mag unit is installed on the base plate directly
①
Remove the existing Mag unit.
