- 5 -
How To Use Neodymium Magnet
The red lever is for sliding the neodymium magnet to
generate resistance between the magnet and the steel
flywheel.
It does not require any electric power so it allows to
use outdoors as same as the stationary trainer.
4 levels are available. Good for light training sessions,
warming up or cooling down, or daily excercise.
To use it, slide the magnet unit while pushing down
the red lever. Set the lever in the fixed position.
The closer the magnet is to the flywheel, the more the
resistance power.
0-Position
Load Level :
Few
(not Zero)
Magnet sits in the farthest position from the
flywheel.
Load Level :
Approx. 100W
(@ 40 km/h)
※
Magnet is 1 step closer to the flywheel.
Load Level :
Approx. 200W
(@ 40 km/h)
※
Magnet is 2 steps closer to the flywheel.
Load Level :
Approx. 300W
(@ 40 km/h)
※
Magnet is in the closest position to the
flywheel.
!
Be careful not to pinch your finger between the magnet and the flywheel.
!
Confirm before using if the neodymium magnet surface is clean.
Neodymium Magnet
Slide Lever
Indicator
※
Power data is not
guaranteed accurate
and could vary.
!
Do the power adjustment AFTER the wheel stops completely.
!
Set the magnet at the 0-position when you use LST9200 as a smart trainer.
0
2 3
1
0
2 3
1
0
2 3
1
0
2 3
1
(Fig. J)
(Fig. K)
(Fig. L)
(Fig. M)
(Fig. N)
1-Position
2-Position
3-Position
