- 8 -
5
!
• If strange noises or vibration persist, discontinue use immediately and return to your Minoura dealer
or place of purchase for assistance. You may also contact Minoura Co.,Ltd.: 1197-1 Godo, Anpachi,
Gifu 503-2305 Japan, or contact to Minoura North American R&D Center at 1-510-538-8599 or email
• Always check for tightness of bolts and nuts before using.
• Check V-Belt and couplings for excessive wear or damage.
• Remove all oils and moisture from drive pulleys and other devices.
• Keep dry and out of weather.
!
(Fig. P)
After replacing the rollers, you must fix the pulley’s upper and lower covers firmly.
On the Mag unit side, after applying the pulley you must pull the Mag unit to tension the V-
Belt.
Then, tighten the two bolts while holding the V-Belt in the proper tension.
When you fix the upper and lower roller covers, you must
make sure these covers are parallel.
If the covers are not parallel, it may result in vibration that
may loosen the rollers and cause an accident. (see Fig. P)
To dispose of an old or broken trainer, please disassemble as much as possible
and recycle properly.
Do NOT dispose of trainer in trash. Harmful gas may occur if burned.
Keep abandoned parts away from children.
NOTE ON DISPOSAL
MAINTENANCE AND SERVICE
