- 2 -
!
!
!
!
!
!
!
!
!
!
!
!
Use two-wheeled bicycles only. Tandems may be used if balanced correctly.
Remove all oils and moisture from drive pulleys before use.
Keep both hands on handlebars at all times and maintain a normal riding position.
After you ride bicycle on the HyperRim trainer, remove all dirt and particles from rim,
so that you'll have effective braking on your future rides.
Check the couplings supporting the rear hub for damage
and cracks. Accidents may occur from cracked or damaged
couplings.
When using the HyperRim trainer, place it on a flat surface for safe training.
Adjust the drive-pulley height so they are even and touching the bicycle rim only (not
the tire).
Do not over tighten the hub-clamp handles. Over-tightening may cause damage to
the trainer or bicycle frame. The clamp handles should be a snug and secure fit. Do
not force!
Keep away from small children.
Before use, make sure all bolts and nuts are securely fastened.
When installing your bicycle, make sure the rim is located in the center of the frame.
This centering can be achieved by rotating the hub-clamp handles.
Keep hands and feet away from spinning rollers and wheels at all times.
X
WARNING
Please obey warning signs.
