- 6 -
How To Use The 15mm Thru Axle
!
The front fork support is compatible with both the standard 9mm quick release
skewer and the 15mm thru type axle.
To use 15mm thru axle, remove the headless bolts under the sleeve guide end
in the fork mount (do not remove the normal bolts) and pull out both the red
adapter sleeve and the Q/R.
Align the front fork and the fork support hole, insert the 15mm axle to set the
front fork.
(The bottom side of the fork mount)
Make sure the bolt type you are going to remove.
Do not remove the standard bolt with head.
Adapter Sleeve (red)
Headless
Bolt
How To Mount Your Bike
1
2
3
Remove the front wheel from your bicycle and set the front fork into the mount firmly.
3
Place the rear wheel on both rear rollers.
Slide and adjust the center frame position so that your rear tire contacts both rollers evenly.
Finally, tighten the center frame locking knob firmly.
Required Tool :
3mm Hex Wrench
(not included)
!
Do NOT grasp brake lever after
removing the wheel if your bike is
equipped with hydraulic disc brake.
