1
5
- 5 -
How To Adjust The Front Fork Support Height
2
3
4
Simulating Uphill Angle
0％
3％
6％
8％
10％
Each hole corresponds to an angle that simulates
climbing. (based on a 700c wheel)
Turn the knob lever counter-clockwise to loosen,
and pull up the front fork support.
The lever becomes free by pulling the lever. You can
set the lever at your favorite angle.
The stopper pin can be removed only while the fork
mount is lifted up.
Insert the pin into the hole that corresponds best to
the incline you want.
Slide down the fork mount until the stopper pin
reaches the front frame.
Turn the knob lever clockwise and tighten
firmly.
