3. Using Your Camera
32
3.3 Photo Burst
In photo burst mode, the camera will take a set number of images with each
press of the SHUTTER button.
To enter Photo Burst mode, power the camera on and press the MODE/OK
button. Use the LEFT or RIGHT buttons to select Photo and press the
MODE/OK button to enter the Photo Mode. Then rotate the scene dial on the
top of the camera to photo burst mode.
1. Line up your shot by looking at the LCD screen to see what is in the shot.
2. Hold the camera steady and press the SHUTTER button to capture the
set number of photos.
3. The number of photos that can be captured at a particular resolution will
be displayed in the top right corner of the screen.
4.
on the screen if there is no SD
will be shown on the screen when the SD card is full.
5. The number of remaining photos is determined by the selected photo
resolution. The higher the photo resolution, the lower the number of
photos you are able to be save to the memory card. Before capturing any
photos, you can select a preferred photo resolution.
3.3.1 Photo Size
This function sets the photo resolution. The higher the resolution, the greater
the photo quality and the larger the file size of the photo.
1. In Photo Burst Mode press the MENU button.
2. Select the Camera icon on the top of the left side of the screen using the
UP or DOWN buttons.
3. Press the RIGHT button to enter the settings menu.
4. Select
Photo Size
using the UP or DOWN buttons and press the
MODE/OK button to enter the
Photo Size
menu.
5. Use the UP or DOWN buttons to navigate the menu, and press the
MODE/OK button to confirm your selected option
(24MP, 18MP, 12MP)
.
6. Press the MENU button to exit the settings menu without making a
selection.
3.3.2 Photo Burst
This function lets you set the number of photos captured with each photo
burst.
1. In Photo Burst Mode press the MENU button.
2. Select the Camera icon on the top of the left side of the screen using the
