Minolta MND20 User Manual Download Page 2

1. About Your Camera 

About this Manual 

Congratulations on purchasing the Minolta MND20 Digital Camera! 
The contents of this manual are subject to change without notice. Note that the 
example screens and product illustrations shown in this User’s Guide may differ 
somewhat from the screens and configuration of the actual camera. 

Copyright 

This manual contains proprietary information protected by copyright. All rights 
are reserved. No part of this manual may be reproduced by any mechanical, 
electronic or other means, in any form, without prior written permission of Elite 
Brands Inc. © 2022. 

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT 

This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, which 
can be determined by turning the equipment off and on, the user is encouraged 
to try to correct the interference by one or more of the following measures: 
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver. 
•  Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected. 

•  Consult the dealer or an experienced radio/TV technician for help.

CAUTION: 

Any changes or modifications not expressly approved by the party responsible 
for compliance could void the user's authority to operate the equipment. 
This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: 
(1) 

This device may not cause harmful interference and 

(2) 

This device must accept any interference received, including interference

that may cause undesired operation. 

RF Exposure Warning 

This equipment complies with FCC RF radiation exposure limits set forth for an 
uncontrolled environment. This equipment must be installed and operated in 
accordance with provided instructions and must not be co-located or operating in 
conjunction with any other antenna or transmitter. End-users and installers must 
be provided with antenna installation instructions and transmitter operating 
conditions for satisfying RF exposure compliance. 

Summary of Contents for MND20































Reviews: