4.2 Photo Mode Settings
Overview
Your camcorder comes preset with some user-adjustable settings to fine tune and customize
how you would like your photos to be captured. The settings are already optimized and
preset for the easiest experience.
Before you begin, ensure you are in PHOTO mode . From the main screen, press the
MODE
button twice. The current mode will be displayed in the upper right corner of the
display. To cycle through the different modes, simply press the
MODE
button again
.
NOTE: The settings menu cannot be accessed while the camcorder is recording a video file.
If the camcorder is recording a file, you must stop recording before the settings menu can be
accessed. To stop recording at any time, press the OK/RECORD button.
4.2.1 Photo Resolution
Your camcorder has a number of preset photo resolution sizes. A higher resolution will
produce a higher quality and lager photo.
1. In PHOTO mode, press the
MENU
button. Select
‘Photo Resolution’
by using the
UP
or
DOWN
buttons. Press the
OK/RECORD
button
to enter the
‘Photo Resolution’
submenu.
2. Press the
UP
or
DOWN
buttons again to navigate the submenu, and select a setting.
You can select from
12 Mega Pixels
(highest quality),
8 Mega Pixels
(high quality),
5 Mega Pixels
(medium quality),
3 Mega Pixels
(low quality), and 1.
3 Mega Pixels
(lowest quality).
3. Press the
OK/RECORD
button to confirm your selected setting.
4. To exit the settings menu, press the
MENU
button twice and your camcorder will return
to the main status screen of the current mode.
4.2.2 Photo Stabilization
This setting enables image capture in shaky or low-light settings by electronically eliminating
motion blur and canceling shake.
1. In PHOTO mode, press the
MENU
button. Select
‘Photo Stabilization’
by using the
UP
or
DOWN
buttons. Press the
OK/RECORD
button
to enter the
‘Photo Stabilization’
submenu.
